Hydrodynamic Separators & SPEL Stormceptor: How They Work

What is a hydrodynamic separator?

Hydrodynamic separators and vault-type separators are underground stormwater quality improvement devices (SQIDs) that remove pollutants using physics rather than filter media: flow is slowed or rotated inside a chamber so that sediment settles out, while oils and floatables rise and are retained. There are no cartridges to replace and no plants to establish, which makes these devices attractive where runoff carries sediment and hydrocarbons – car parks, fuel handling areas, industrial hardstands and road catchments.

Devices in this family range from compact vortex units, which spin the flow in a circular chamber, to larger multi-chamber vaults that rely on quiescent (still) conditions and coalescing surfaces to separate pollutants.

The SPEL Stormceptor: a two-chamber vault separator

A well-known example on Australian projects is the SPEL Stormceptor Class 1, a horizontally configured two-chamber separator fitted with a coalescer unit. Based on the manufacturer’s published information:

• Stormwater enters the first chamber, where velocity drops and coarse sediment settles
• Flow then passes through a coalescer – a high-surface-area element that encourages fine oil droplets to merge and rise – into a second chamber with quiescent conditions for further separation of suspended solids and light liquids
• The geometry prevents contaminated water short-circuiting across the surface before separation has occurred
• The device targets sediment, suspended solids and hydrocarbons, and is positioned by the manufacturer as a secondary treatment device

SPEL’s related Puraceptor is a full-retention Class 1 separator that treats 100% of flow and includes an automatic closure device for spill capture – typically specified for higher-risk areas such as fuelling facilities rather than general WSUD compliance. Comparable separator and vault products are available from several other suppliers; as an independent consultancy we specify on merit.

What separators do well – and what they don’t

Strengths

• Hydrocarbon and oil capture – coalescing separators are one of the few WSUD devices designed specifically for light liquids, important for car parks and trafficked pavements
• Coarse and medium sediment removal – effective settling of the heavier fraction of TSS
• Small footprint, fully underground – trafficable lids mean no loss of usable site area
• Simple maintenance – periodic eduction (vacuum pump-out) of captured sediment and oil

Limitations

• Dissolved nutrients largely pass through. Settling and coalescing cannot remove dissolved nitrogen and phosphorus, so a separator alone rarely meets NSW council TP and TN targets.
• Fine particles are harder to settle. Performance on fine TSS depends on the device, the flow rate and the particle size distribution assumed.

For this reason separators usually sit in the middle of a treatment train: downstream of (or combined with) gross pollutant capture, and upstream of a tertiary measure such as bioretention or cartridge filtration when nutrient targets apply.

When do NSW councils accept them?

Council acceptance of proprietary devices is the key design risk, and policies vary significantly across NSW. In practice:

• Many councils accept hydrodynamic separators as part of a treatment train where the MUSIC model uses justifiable treatment parameters – often requiring independent performance verification such as Stormwater Australia’s SQIDEP protocol rather than manufacturer claims alone
• Some councils publish lists of accepted devices or default modelling parameters for proprietary systems
• A few councils express a strong preference for vegetated measures and will only accept proprietary devices where bioretention is demonstrably infeasible
• Separators targeting hydrocarbons are widely accepted – and sometimes required – for high-risk land uses such as fuel dispensing and vehicle wash areas, separate from WSUD targets

The practical lesson: confirm the council’s proprietary device policy before the stormwater strategy is locked in. Substituting a device at Construction Certificate stage usually means re-running the MUSIC model and amending the approved plans.

Maintenance and whole-of-life cost

Separators have low ongoing complexity but non-trivial servicing costs: captured sediment and hydrocarbons must be removed by vacuum truck, typically every six to twelve months depending on catchment loading, and disposed of appropriately. Councils commonly require a maintenance agreement or positive covenant, so the long-term owner needs to be identified during design.

Contrive Consultants designs WSUD systems and prepares MUSIC and DRAINS models accepted by NSW councils, including treatment trains using separators, GPTs and bioretention. View our services, call +61 497 848 111, email info@contriveconsultants.com.au or contact us to talk through your site.